Need help? Contact us at (800) 443-8817


Home  > Vacuum Components > Adaptors > Fitting to flange > Baseplate to ISO KF / Blank plug

Product Listing

Baseplate to ISO KF / Blank plug

Baseplate fittings mount through one-inch diameter ports and require a flat, scratch-free sealing surface of at least 44.5mm diameter. A vacuum seal is achieved by uniform compression of an elastomer gasket on the vacuum side of the chamber. A sealing nut and washer are typically fastened on the atmosphere side of the chamber. Hand tightening will usually provide adequate seal compression.

Elastomer seals limit the operating temperature range and bake-out temperature. For Viton® 0-rings, the maximum intermittent bake-out temperature is 200oC with a sustained use to 150oC. Repeated bake-out cycling can result in the deterioration of the 0-ring.

Features
  • For sealing standard 25.4 diameter mounting holes when not in use
  • Seal is by Viton® 0-ring
  • Stainless steel or brass plug
Baseplate to Blank plug



Click image to enlarge


Click image to enlarge




Specifications:
Material  
 Fittings 304ss & 316ss
 Flanges 304ss
Vacuum Range 1x10-8mbar
Fittings Leak Test  2x10-10 cc/sec He

For any question on this Section Ask Our Experts



Drawings download if available are indicated by in the Part Number column. Click on this icon to view all downloads.
Literature downloads (including manuals), if available, is indicated by in the Part Number column. Click on this icon to view all available product literature and to download a PDF copy.

Catalog