|
|
|
Product Index
|
|
Vacuum environments are a key ingredient in the analysis, development and
fabrication of some of the world's most basic as well as the most sophisticated
products. From complex experiments in particle physics to delicate x-ray
tomography of the human body to mass production of decorative coatings on
automobile grills and exacting anti-reflective coatings on precision optical
elements, vacuum environments are essential. These and hundreds of other
processes and products would be impossible to reproduce in an atmospheric
environment. Today, near perfect vacuum environments can be attained in
laboratory and production vacuum systems by careful selection of vacuum
components used in their design, construction and operation. A system's ultimate
vacuum potential will always be limited by its weakest components. |
|
|
Flanges and Fittings
|
| Del Seal™ Flanges Go to
Introduction |
1-1/3 inch OD Mini,
2-1/8 inch OD,
2-3/4 inch OD,
3-3/8 inch OD,
4-1/2 inch OD,
4-5/8 inch OD,
6 inch OD,
6-3/4 inch OD,
8 inch OD,
10 inch OD,
12 inch OD,
13-1/4 inch OD,
14 inch OD,
16-1/2 inch OD
|
| Double Sided |
1-1/3 inch,
2-1/8 inch,
2-3/4 inch,
2-3/4 inch Tapped,
2-3/4 inch NPT Tapped,
3-3/8 to 6-3/4 inch,
8 to 16-1/2 inch
|
| Zero Length Reducers |
| Zero Length Reducers
|
| Del Seal™ CF Fittings
Go to Introduction |
Half Nipple,
Nipple,
Minimum Length
Straight Tube Nipple Reducers,
Conical Nipple Reducers
Elbows 45 degrees with tangents,
Elbows 90 degrees,
Elbows 90 degrees with tangents,
Elbows- High Conductance
Flexible Coupling
Tees,
Reducing Tees
Four-Way Crosses,
Reducing Crosses,
Five-Way Crosses,
Six-Way Crosses
Cubes
Multiport Straight-In,
Multiport Angled,
Multiport Multi-Mini Flange,
Multiport Cluster Flange
|
| Wire Seal Flanges
Go to Introduction |
| 10 to 24 in
OD Wire Seal Flanges
|
| Kwik-Flange™ ISO KF
Go to Introduction |
| NW16
, NW25, NW40,
NW50
|
| Large Flange ISO LF
Go to Introduction |
| NW63,
NW80, NW100,
NW160, NW200,
NW250, NW320,
NW400, NW500
|
| ISO KF & LF Fittings
Go to Introduction |
Watercooled KF Clamp Style,
Watercooled LF Clamp style
Half Nipples KF Clamp Style,
Half Nipples LF Clamp style,
Half Nipples LF Bolt style
Nipples Straight Tube,
Flexible Coupling,
Straight Tube Nipple Reducers,
Conical Nipple Reducers
Elbows 45 Degree with Tangents,
Elbows 90 Degree,
Elbows 90 Degree with Tangents,
Elbows High Conductance
Tees,
Reducing Tees
Four-Way Crosses,
Reducing Crosses,
Five-Way Crosses,
Six-Way Crosses
|
| ANSI ASA Flanges Go to
Introduction |
| Non Rotatable
ASA Smooth Face, Non Rotatable
ASA O-ring Groove
|
| Weldable Components Go to
Introduction |
Vacuum Tubing,
Conical Reducer
Welded Bellows,
Formed Bellows -Standard Cuffs,
Formed Bellows -Weld Cuffs
Elbows 45 degrees with Tangents,
Elbows 45 degrees,
90 degrees with Tangents,
Elbows High Conductance
Tees,
Reducing Tee
Four Way crosses,
Reducing crosses,
Five Way crosses,
Six Way crosses
|
| Quick Disconnect Go to
Introduction |
| Stainless Steel,
Brass, Blankoff Stainless Steel,
O-Rings, Blankoff, Brass
|
| Hybrid Adapters Go to
Introduction |
Flange to Flange
Del Seal™ CF to Kwik-Flange™ KF,
Del Seal™ CF to Large-Flange™ LF,
Kwik-Flange™ ISO to ASA smooth face,
Kwik-Flange™ ISO to ASA with groove,
Large-Flange™ ISO to ASA smooth face,
Large-Flange ISO to ASA with groove
Fitting to Flange
Swagelok® to Del-Seal™ CF,
Swagelok® to Kwik-Flange™ KF,
Male VCR to Del-Seal™ CF,
Male VCR to Kwik-Flange™ KF
Quick-Disconnect to Del-Seal™ CF,
Quick-Disconnect to Baseplate,
Quick-Disconnect to Kwik-Flange™ KF
Female NPT to Del-Seal™ CF
Female NPT to Kwik-Flange™ KF,
Female NPT to Baseplate
Male NPT to Kwik-Flange™ KF,
Kwik-Flange™ KF to Rubber Hose,
Kwik-Flange™ KF to PVC Hose,
Kwik-Flange™ KF to Welch Pump
Baseplate to Kwik-Flange™ KF,
Baseplate to Blank Plug
|
| Hardware for
Flanges and Fittings |
Copper Gasket,
Viton Gasket,
Socket Head Screw,
Socket Head Screw/Plate Nut,
Socket Head Screw Silver plated,
Ball Wrench, Hex driver,
Plate Nuts
Flange Cover Plastic
Hex Head Bolt,
Hex Head Bolt / Plate Nut,
Hex Head Bolt Silver Plated,
12-PT Bolt,
12 PT Bolt Silver Plated,
12 PT Bolt / Plate Nut,
12-PT Box Wrench
Hinged Clamp,
Bulkhead Clamp,
Claw Clamp,
Band Clamp
Centering Rings- Kwik Flange,
Centering Ring - Large Flange,
Rotatable Bolt Ring
O-Ring Retainer,
O-Ring Replacement for Kwik-Flange,
O-Ring Replacement for Large & ASA Flanges,
O-Ring Replacement for Non standard Kwik flange,
Large Flange Bolts,
|
Back To Top |
| Valves
|
| Gate Valves
Go to Introduction
Options Guide |
| Circular Gate Valves
Specifications |
5/8 inch Ports, 1-1/2 inch
Ports, 2 inch
Ports,
2-1/2 inch Ports, 3 inch
Ports, 4 inch Ports
5 inch Ports,
6 inch Ports,
8 inch Ports,
10 inch Ports,
12 inch Ports
|
| Rectangular Gate Valves
Specifications |
SEMI / MESC Introduction,
SEMI / MESC High Vacuum Series
C-Loc Introduction,
C-Loc High Vacuum Series
|
Angle & Inline Valves
Go to
Introduction
Options Guide
Specifications
Guidelines
Port Connection Guide |
| Angle Valves |
1/4 inch ports,
1/2 inch ports,
3/4 inch ports,
1 inch ports,
1-1/2 inch ports,
2 inch ports
2-1/2 inch ports,
3 inch ports,
4 inch ports,
6 inch ports,
8 inch ports,
10 inch ports
|
| Inline Valves |
|
3/4 inch ports,
1 inch ports,
1-1/2 inch ports,
2 inch ports,
2-1/2 inch ports,
3 inch ports
|
| |
| All-Metal Valves
Introduction |
| All-Metal Angle Valve |
3/4 inch,
1-1/2 inch,
2-1/2 inch
|
| All-Metal Inline Valve |
1-1/2 inch,
2-1/2 inch
|
| Variable Leak Valves |
| Fine Leak
Valve Introduction |
| Fine Leak
Valves |
| Precision Leak
Valves Introduction |
| Precision Leak
Valves |
| |
| Butterfly Valves |
| Butterfly Valves
Introduction |
| 3/4 to 2 Inch Ports |
| |
| Hardware for Valves |
Gate and Bonnet Seal,
Body Flange Seal,
Metric Hex Head Set,
Metric Socket Head,
Hex Head Set,
Bolt Hole Bushing,
Poppet and Bonnet Seal,
All-Metal Valves Gasket Kit,
Butterfly Valve Seal Kit
|
| |
|
Back To Top |
| Roughing
Components |
| Foreline Traps
Introduction |
Molecular Sieve
Del Seal™ CF,
ISO KF and ISO LF,
Hose Connection
|
Coaxial
Del Seal™ CF, ISO KF and ISO LF,
Hose Connection
|
Coaxial with Replaceable Filter
Del Seal™ CF, ISO KF and ISO LF,
Hose Connection
|
Filter Elements
Use with 2 inch Body Traps,
Use with 4 inch Body Traps,
Use with 6 inch Body Traps,
Use with 8 inch Body Traps
|
Liquid Nitrogen
Del Seal™ CF,
ISO KF and ISO LF,
Hose Connection
|
| Vacuum Pumps
Introduction
|
Cryogenic Sorption
Individual Pump,
Dual System,
Triple System
|
| Accessories
for Roughing Components
|
| Accessories
|
|
|
| Vacuum Roughing Hose
Introduction
|
PVC Wire Reinforced Hose
Kwik-Flange™
, Coiled Hose,
PVC Hose Adapter,
PVC Hose Clamp
|
Flexible Stainless Steel Hose
Del-Seal™ CF - Medium Wall,
Del-Seal™ CF - Thin Wall,
ISO KF and LF - Medium Wall
ISO KF and LF - Thin Wall
Weldable Hose Ends- Medium Wall
Weldable Hose Ends- Thin Wall
|
Del-Flex™ Process Lines
Del-Seal™ CF,
ISO KF , VCR,
Swagelok™,
Weldable Tube Ends
|
PVC Tubing and Fitting
Tube,
Weld Flange,
Coupling,
Tee,
45 degree Elbow,
90 degree Elbow,
Primer & Cement
|
| Accessories for Vacuum Roughing Hose
|
|
Double Sided Access Flange,
Up-To-Air Valves,
Pressure Burst Disc,
Test Port Kit
|
| Lubricants |
|
Lubricant for Threads,
Dow Corning Vacuum Lubricant,
Apiezon Vacuum Lubricant,
Krytox Vacuum Lubricant,
Sealant
|
|
Back To Top |
| Feedthroughs |
| Electrical
Feedthroughs Introduction |
| BNC Coaxial,
MHV Coaxial, SHV Coaxial,
Type N Coaxial, Medium Current,
High Current, High Voltage,
High Current, RF Power,
Breaks and Envelopes,
Multipin Power, Multipin Instrumentation |
Type D Instrumentation
UHV Series,
HV Series, Ribbon Cable with Crimp Sockets,
Ribbon Cable with Sockets and Connector,
In-Vacuum Ribbon, In-Vacuum Connector,
In-vacuum sockets,
Air-side connector
|
In-vacuum Insulated Wire
Single Strand -KAP1,
Single Strand -KAP2,
Coaxial, Single Strand -KAP3,
Coaxial, Seven Strand -KAP4,
Coaxial, Seven Strand -KAP5
|
In-vacuum Connectors
Crimp
Type,
Push On, Inline
Electrical, Multipin,
Inline Clamp, Angle
Clamp,
Connector, BNC
Coaxial Cable |
Insulator and Shields
Ceramic
Spacers, Ceramic Beads,
High Voltage Shields |
| |
| Fluid
Feedthroughs
Introduction |
| General Purpose with Swagelock®,
General Purpose with VCR®,
Liquid Nitrogen with Swagelock®,
Liquid Nitrogen with VCR® |
| |
|
Back To Top |
| Motion & Manipulation |
| Introduction |
| Motion
Introduction |
Rotary Motion
Standard,
High Temperature,
Pneumatic, Miniature,
Precision, Magnetic,
Direct
Drive, High Vacuum, Direct
Drive, Differentially Pumped |
Linear Motion
Standard, High Temperature Standard,
High Temperature Compact,
Miniature, Push-Pull,
Rack & Pinion,
Pneumatic, Heavy Duty,
Heavy Duty, Pneumatic,
Heavy Duty, Push-Pull,
Heavy Duty, Tunnel Access,
Heavy Duty, Micrometer
|
Multi-Motion
Rotary-Linear, Standard,
Rotary-Linear, Precision,
Rotary-Linear, Direct,
Wobble Stick, Wobble Stick, Pincer,
Wobble Stick, Rotary Pincer,
Wobble Stick, Wide Angle |
| |
| Manipulation
Introduction |
| XYZ Stages |
| V-Plane® Dual Axis XY,
V-Plane® Single Axis Z,
V-Plane® Guide Tube,
Single Axis, Compact Z,
Triple Axis, Compact XYZ,
Triple Axis, Standard XYZ,
Rotatable Axis, 360° Adjustable |
|
|
Load-Lock Systems Introduction
Circular Entry,
Rectangular Entry,
Magnetic Transporters
|
Quick-Access Blank Doors
Blind Tapped Holes,
Clearance Holes |
Quick-Access Viewport Doors
Blind Tapped Holes,
Clearance Holes |
| Bolt-Kits for Quick-Access Doors |
| |
Port Aligners
Load-Lock Gimbal,
Standard Gimbal,
Off-Axis Precision,
Off-Axis Heavy Duty |
| |
| In-Vacuum Accessories
Introduction |
Cab-Fast® Sample Handlers
Platen Fork,
Platen Sample Holder,
Sample Mount Strips,
Dock Sample-Holder,
Vacuum Dock,
Transport Dock,
Screws, non-vented
|
Mini-Scaffold® Mounting System
Port Clamp Mount,
Rod Clamp 90°,
Rod Clamp 180°,
Universal Ball Joint,
Specimen Holder,
Mounting Plate, Small,
Mounting Plate, Large,
Mounting Strap,
Bearing Mount, Radial,
Bearing Mount, Linear,
Gear Box 90°,
Rod Guide, Mirror Mount,
Wrench Kit,
Extension Rods,
Screws, non-vented
|
Rotary & Linear Motion
Miter & Beval Gear,
Universal Joint, Bellows Coupling,
Sleeve Coupling, Set Screw Collar,
Radial Ball Bearing,
Bearing Mount, Radial,
Linear Ball Bearing,
Bearing Mount, Linear,
Ground Stock,
Vented Screws |
| |
| Motorization
Introduction
Motor Option Specifications |
In-Vacuum Steeper Motors
Miniature High Vacuum,
High Torque High Vacuum,
Miniature Ultra High Vacuum,
High Torque Ultra High Vacuum |
Motor Controls
DC Motor, 12V Output,
DC Motor, 90V Output,
Stepper Motor Controller
and Stepper Motor Indexer are obsolete
|
|
Back To Top
|
| Thin Film Deposition |
| Introduction |
| Thermal Evaporation |
Introduction to
Re-Vap 900 System, Re-Vap 900 System
Introduction to
Re-Vap 3000 System, Re-Vap 3000 System |
| |
| Miniature E-Vap Systems |
Introduction to
e-Vap 100 System Miniature
e-Vap 100 System
Introduction to
e-Vap 3000 System Miniature
e-Vap 3000 System
Introduction to
e-Vap Mighty Source Miniature
e-Vap Mighty Source
|
| |
| Modular Evap. Systems |
Individual Source Introduction
Frame 1 - Small, Fixed Pocket,
Frame 2 - Large, Fixed Pocket,
Frame 3 - Small, Rotary Pocket,
Frame 4 - Small, UHV Rotary Pocket,
Frame 5 - Large, HV & UHV Rotary Pocket,
Frame 6 - Extra Large, Rotary Pocket
Horizontal Flange Mount Introduction
Horizontal Flange Mount Assembly
Vertical Flange Mount Introduction
Vertical Flange Mount Assembly
|
| |
| Power Supplies
Introduction |
| Power Supplies |
| |
| Controls and Measurement |
| Source Controller
Introduction
Source Controller |
| Programmable Sweep Controller
Introduction
Programmable Sweep Controller |
Deposition Control & Measurement
SQM160, SQC122,
SQC222, SQM242,
Crystal Sensor Packages,
XL12 Multi Crystal Sensor Head
|
| Crucible Indexer
Introduction
Crucible Indexer |
| |
| Evap. Accessories
Introduction |
Installation Hardware
Safety Equipment,
Shutters, Water Flow Switch,
Feedthroughs Water & Electrical,
Feedthroughs Rotary,
Assembly Equipment
Consumables
270 degree Emitter,
HF Emitter, 3kw Emitter
Crucible Liners
2 cc, 6 cc,
7 cc, 12 cc,
15 cc, 25
cc, 30 cc,
40 cc, 75
cc, 100 cc
|
|
|
|
Back To Top
|
|
|
|
|